File contains 11 pages of blueline prints of hand-drawn working designs for Killam Library furnishings, labelled F-100 though F-110, which include initial and revised plans (elevations and section drawings) for: cataloguer and bibliographer's work units; card catalogue units; consultation tables; newspaper storage units; display cases; atlas stands; file tubs; and dictionary stands. Annotations with dates include revisions based on requests by librarians.
File contains 2 pages of blackline prints of working designs for a display unit and book cases for the planned Kipling Room in the Killam Library. The drawings include elevations and section details, are stamped "preliminary," numbered S-8 and S-8, and dated 31 March 1969. The Kipling Room ended up remaining in the O.E. Smith wing of the Macdonald Library; it is possible that these furniture plans were used instead for the Morse Room, which was located behind the MacMechan Auditorium.
Item is a presentation drawing created by Drew Sperry of the west elevation of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
Item is a presentation drawing created by Drew Sperry showing the west view of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
Item is a presentation board created by Drew Sperry showing the view from the median strip of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
File contains a 1962 site plan and drawings for a dining hall, gymnasium, and women's residence. There are also 1985 drawings for renovations to the women's residence.
Item is a presentation board created by Drew Sperry showing three floor plans of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
Item is a 1929 presentation drawing by architect Andrew Cobb of the third floor plan for an arts building at Dalhousie that was planned but never built. This version includes a drafting room and lecture hall both open to the roof, four smaller lecture rooms, five studies and a small library/office.
Item is a 1932 presentation drawing by architect Andrew Cobb of the third floor plan for an arts building at Dalhousie that was planned but never built. This version includes an arts room open to the roof, five lecture rooms, five studies and a professors' office.
Item is a 1929 presentation drawing by architect Andrew Cobb of the third floor plan for an arts building at Dalhousie that was planned but never built. This version includes drafting and lecture rooms open to the roof, offices and a library, four other lecture rooms, six studies and a storeroom.
Item is a presentation drawing created by Drew Sperry of the third floor plan of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
Item is a 1930 presentation drawing by architect Andrew Cobb of the third floor plan for an arts building at Dalhousie that was planned but never built. This version includes a large arts room and lecture hall both open to the roof, four small lecture rooms and five studies.
Item is a catalogue for the exhibition, 'The Lost Craft of Ornamented Architecture: Canadian Architectural Drawings, 1850-1930,' held at the Dalhousie Art Gallery from March 10 to April 24, 1983.
Series contains materials documenting the rides used by the Bill Lynch Shows and related materials. Written material includes expenses, maintenance issues, and assembly instructions. Related materials include blueprints for the rides.
Subseries comprises records created or collected by the Office of the Architect and Facilities Management at Dalhousie University related to the design and architectural revisions to the Technical University of Nova Scotia, later the Sexton Campus.
File contains a hot and cold water piping plan; excavation plan; sewer plan, including manhole details; a sketch of the dispensary quarters; and floor plans for the Public Health Building designed by Andrew R. Cobb.
File contains 8 construction drawings for a swimming pool and enclosure added to the family home designed by Drew Sperry on Cranston Avenue. Drawings include a site plan; floor plans; sections; elevations; concrete details; and foundation plans. File also includes a site plan copy and location certificate.
Item is a pencil sketch of a plan for Dalhousie University's Studley campus. The drawing was produced by President Arthur Stanley MacKenzie; written on the back is: "One of early attempts by ASM to design the campus. When slightly modified it became final design."
Item is a site plan of Studley campus grounds, indicating the placement of roads and buildings. The drawing was produced by Mawson and Dunington-Grubb, Landscape Architects of Toronto. Written on the reverse: "Darling's layout of grounds."
File contains potential site plans for Dalhousie University's Studley campus as well as landscape plans indicating actual plantings. There is also one drawing of a unrealized medical school site plan.
File contains a construction package set of drawings for a 2002 addition to the original Student Union Building at Dalhousie University. The drawings were produced by Fowler Bauld and Mitchell, Campbell Comeau Engineering and Morris & Richard Consulting Engineers. The file includes a listing of set ID numbers and notes from Facilities Management.
File contains 3 construction drawings for a kitchen renovation, including a layout, section and door schedule. There are also five construction drawings for a bathroom renovation or addition.
File contains 11 construction drawings for the family home designed by Drew Sperry on Cranston Avenue. Drawings include elevations; window and door details; roof plans and details; and electrical and plumbing plans.
File contains 13 presentation drawings on hardboard for the family home designed by Drew Sperry on Cranston Avenue, Dartmouth, Nova Scotia. The numbered drawings include a site plan; lower, main and upper floor plans; roof plan; sections; and font and back elevations.
File comprises a set of marked-up floor plans for the Killam Library's space program plan, including bar charts for the Macdonald Library to Killam Library renovation move.
Item is a presentation drawing created by Drew Sperry of the south elevation of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
File contains a set of four blueprint floor plans for the President's residence at Dalhousie University drawn by H.R. Theakston, University Engineer, in July 1925. The second floor plan indicates furniture placement and the reverse of the third floor plan is covered with handwritten notes and measurements. The file also contains six sheets of floor plans drawn up by Arthur Stanley MacKenzie, who was the first Dalhousie president to live in the house after its purchase by the university in 1925.
Item is a site plan labelled "Scheme E" for the layout of roads and buildings on Studley Campus. The drawing was produced by Darling & Pearson Architects of Toronto.
Item is a site plan labelled "Scheme B" for the layout of roads and buildings on Studley Campus. Written on the reverse: "Darling's layout of grounds."
Item is a site plan labelled "Scheme D" for the layout of roads and buildings on Studley Campus. The drawing was produced by Darling & Pearson Architects of Toronto.
Item is a site plan for Studley campus produced by Mackenzie & Howe, Landscape Architects and Artists. On the reverse is written: "Trial suggestion of ASM for laying-out of grounds and approved with slight changes (shown in red) by Darling and Mawson, and adopted." A.S.M. is Arthur Stanley MacKenzie, Dalhousie University president.
Item is a presentation drawing created by Drew Sperry of the site plan for a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
Item is a presentation drawing created by Drew Sperry of a section perspective for a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
Item is a presentation board created by Drew Sperry showing a section perspective of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
Item is a 1932 presentation drawing by architect Andrew Cobb of the second floor plan for an arts building at Dalhousie that was planned but never built. This version includes seven lecture rooms, a dean's office and five studies.
Item is a 1932 presentation drawing by architect Andrew Cobb of the second floor plan for an arts building at Dalhousie that was planned but never built. This version includes a general office, business office, offices for the registrar, president and secretary, a vault, three lecture rooms, and five studies.