Print preview Close

Showing 124 results

Archival Description
File
Print preview View:

6 results with digital objects Show results with digital objects

Drawings for a residence for Mr. W.R. MacInnes

File contains a set of ten construction blueprints for a three-story house with six bedrooms and a maid's room, designed by Willam R. Cobb. The house was built in 1926 for William MacInnes (of W.R. MacInnes & Co, General Insurance Agents and Investment Bankers) at 18 Oxford Street, Halifax. In 1975 Dalhousie University purchased the house (then 135 Oxford Street) to convert to student housing. By 1984 the house had been replaced with a condominium complex called Oxford Court. The drawings are labelled sheets 1-10, and include plans, elevations, sections and roof details.

Drawings of interior views of the Bluenose II

File contains drawings of the interior layout of the Bluenose II. The file includes drawings of different arrangements of the main cabin, proposed modifications to the saloon and hold, and floor plans and cross-sections of the general arrangement of the interior. The file also includes a drawing of the interior of an unidentified restaurant.

Fenwick Place mechanical plans

File contains drawings by Dumaresq & Byrne Limited and D. J. Morris Engineering for Fenwick Place, including: area lighting plot plan; TV antenna, intercom and telephone system risers; electrical distribution schemes; and owner distribution system risers and details.

First draft sketches for the Medical Science Building

File contains Andrew Cobb's rough sketches drawn on pages from a foolscap notebook for the Medical Science Building, including rudimentary elevations and floorplans; a note regarding the necessity of provision for women's lockers and lavatories and the possibility of a medical library; and an overhead drawing of a teaching theatre. File also includes five sheets of 1/16" scale drawings that include basement, first and second floor plans, and longitudinal and cross sections. The pages are all marked: "Please return to A.S.M. (Arthur Stanley Mackenzie)," and the first floor plan also has a note reading: "On S.S. 'Virginian' / July 1st/21."

Flyoplane blueprints

File contains five blueprints for the assembly of the Flyoplane, a ride held by the Bill Lynch Shows. Assembly includes: edgemont clutch and countershaft, car and lighting, gear drive, sweep, and center section and cage. All include parts lists.

Full-scale detail drawings of external masonry elements for Dalhousie's Medical Science Laboratory

File contains seven sheets of FSD (full-scale detail) drawings of masonry for details such as cornices, pilaster boxes and string courses, window sills, and mouldings for the Medical Science Laboratory at Dalhousie University. There are also vestibule details, including the fanlight over the main entrance door. Drawings include elevations, plans and sections.

Gerard Hall architectural plans

File contains a set of architectural plans for Gerard Hall (originally the Halifax Infirmary and School of Nursing) produced by architects C.A. Fowler @ Co. and printed at reduced scale.

Instructions for use and set up of the Little Dipper

File contains four pages of instructions for use and setting up of the Little Dipper, a ride held by the Bill Lynch Shows, as well as three letter-sized blueprints. The blueprints are for the decorative lighting, sign direction, and station canopy.

Little Dipper blueprints

File contains five blueprints for the assembly of the Little Dipper, a ride held by the Bill Lynch Shows. Assembly includes: brake and loading platform, track, drive, drive and pullup chain, and space arrangement.

MacDonald Library bookcase details

File contains full-scale and 3/4-scale shelving detail drawings; details for a chimney-top rain shield; and a leaded letters template for the O.E. Smith Wing addition built in 1956.

Macdonald Memorial Library construction and heating and ventilation blueprints

File contains two complete sets of construction blueprints for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. One set was reproduced from the set of 16 original sheets signed by G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald, all but three of which (nos. 8, 12 and 14) are located in UA-9, Box 1, Folder 1. The other blueprints are marked "set no. 4" and were reproduced before/without the approval signatures. There is also an incomplete set of diazo prints (purple ink on cream paper), as well as a complete set of heating and ventilating blueprints produced by MacMullen, Riley & Durley, Consulting Engineers, and signed by G.S. Campbell and A.D. Falconer and D. McDonald.

Macdonald Memorial Library construction drawings

File contains construction drawings for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. The bulk of the drawings are part of an original set of 16 sheets dated Dec. 20, 1913 that contain the approval signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald. Sheets 8, 12 and 14 are missing, but are extant as blueprints in Box 1, Folder 2. File also contains a 1914 drawing showing revised window details and a sheet no. 6 from a 1920 alteration to the library. Drawing types include floor plans, elevations, sections and details.

Macdonald Memorial Library construction drawings

File contains an electrostatic print set reproduced on polyester of Sheet Nos. 1-16 of Andrew Cobb's construction drawings for the Macdonald Library, as well as a sheet of window details dated June 23, 1914 and one sheet of drawings of additions and alterations dated May 1, 1920.

Macdonald Memorial Library stack room floor plans and elevations

File contains a floor plan and exterior elevations for the MacDonald Library stacks, which show three different window styles for the east facing wall. There are also some early floor plans for the library indicating room appointments and elevations of bookshelves. Drawings are by both Andrew Cobb and Frank Darling.

Medical Library floorplans

File contains basement and first floor plans stamped by the Library Bureau for a medical library at Dalhousie University. File also contains a technical drawing of a magazine storage rack for the medical-dental library, which were submitted by the Steel Equipment Company, Ottawa, ON.

National Research Council building architectural plans

File contains architectural drawings for the National Research Council Laboratory and for the Institute for Marine Biosciences on Oxford Street in Halifax, Nova Scotia. The 1949 drawings, produced by Leslie Fairn and C. Gustave Brault, include plot plans; footings; floor plans; interior room and finish schedules; sections and details; and plumbing, heating and electrical plans. The 1964 and 1979 drawings are for additions and extensions, and were produced by Duffus, Romans, Kundzins and Rounsefell Ltd. The file also includes a set of drawings printed at reduced scale for a submission by Lydon Lynch issued September 2002 for a National Research Council New Industry Partnership Facility Institute for Marine Biosciences.

Nener residence

File contains nine construction drawings for a house designed by Drew Sperry on Pauls Point Road in Hackett's Cove, Halifax Regional Municipality. Drawing types include a site plan; floor and foundation plans; electrical and plumbing plans; sections; and elevations.

Nova Scotia Agricultural College Horticultural building architectural plans 1912

File is reproductions of the architectural plans for the Nova Scotia Agricultural College Horticultural building, August 2nd, 1912. Set A8. Scale 1/8":1'-0". Andrew R. Cobb - Arch - Halifax. 2 sheets. Handwritten in white ink in the lower right corner on sheet no. 1 is illegible. The horticultural building was later named Collins Horticulture Building.

Nova Scotia Agricultural College library plans (interior)

File contains the interior plans for the new Nova Scotia Agricultural College library, it was later named the MacRae Library in 1990 after former principal Herbert MacRae. The plans detail the libraries interior layout, furniture design, and layout for furnishings for the lower and main levels. Plans were designed by Berardinelli Design Limited, Halifax, NS. "Set no. 2".

Peter Green Hall revisions or issues drawings

File contains drawings for Peter Green Hall, labelled "Married Students Housing for Hfx Student Housing Society" on the earlier drawings. Drawings include floor plans, mechanical plans, details and specifications (1967, 1994 and 2000) and new metal siding details and elevations (1985).

Preliminary floor plans for a library at Dalhousie University

File contains 3 pages of blueline prints of floor plans for a library at Dalhousie University, drawn by C.D. Davison & Company, the architectural firm that designed Dalhousie's Student Union Building in 1967. Undated and stamped "preliminary," the plans indicate a library with three floors. The drawings for floors 2 and 3 are annotated with potential seating and/or stack capacity for social sciences, humanities, rare books, graduate students, research and audio visual users, as well as conceptual drawings of study carrels and audio visual booths.

Presentation drawings for a proposed arts building at Dalhousie University

File contains presentation drawings created by Andrew Cobb for an arts building commissioned by the Board of Governors as part of their building plans during the late 1920s/early 1930s, which also included a gymnasium, power plant, men's dormitory, and extensions to the Science Building and Shirreff Hall. The planned site for the building, which was cancelled due to financial restraints, was adjacent to the temporary arts building, which had been built in 1921 to house the law school. The drawings are all marked "282," which presumably was Cobb's job number for the project.

Presentation drawings for a proposed extension to the Science Building

File contains four copies of Andrew R. Cobb's drawings for an extension to the Science Building, which was commissioned by the Board of Governors as part of their building plans during the late 1920s/early 1930s, which also included an Arts Building, gymnasium, power plant, men's dormitory, and extension to Shirreff Hall. The drawings includes basement, ground and second floor plans, and north and west elevations. One copy is in pencil on tissue, two copies are blueprint and one is an electrostatic print set reproduced on polyester.

Public Health Centre for Dalhousie University

File contains a set of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-12, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations. There is also a front elevation titled "Dalhousie Medical Clinic -- Completed Scheme."

Public Health Centre for Dalhousie University

File contains an electrostatic print set reproduced on polyester of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-13, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations.

Renovations and extensions to 6152 Coburg Road

File contains copies of drawings for 6152 Coburg Road, including 1967-68 plans for renovations and extensions to the building when it served as the Nova Scotia College of Art, and 1980 renovation plans when the building was occupied by Dalhousie University School of Management. All three sets of drawings were produced by C.A. Fowler Bauld & Mitchell Ltd. File also contains a list of set ID arrangement details.

Renovations to Studley Apartments

File contains floor and site plans and elevations for a 1975 renovation to Dalhousie's Studley Apartments at 1452 Le Marchant Street. File includes set ID arrangement details.
Results 51 to 100 of 124