Item is a sheet with two drawings of a second floor plan designed to serve as office and lecture spaces before being converted to a law library and eventually a university museum. One plan shows the space partitioned into a lecture hall, faculty room and offices to serve current needs; in the second it is laid out as a law library. There is also a small inset aerial perspective of the new (temporary) Arts Building in relation to the Science Building and Macdonald Library.
Item is an unsigned sketch (likely by President Arthur MacKenzie) for the Macdonald Library that indicates two lecture rooms, a faculty room, offices for the president, bursar and secretary, and coat and toilet facilities for faculty.
Item is a drawing of the ground floor of a building designed to serve as office and lecture spaces before being converted to a law library and eventually a university museum. The plan includes notes regarding future additions and usages.
Item is a pencil sketch of a plan for Dalhousie University's Studley campus. The drawing was produced by President Arthur Stanley MacKenzie; written on the back is: "One of early attempts by ASM to design the campus. When slightly modified it became final design."
Item is a pencil drawing of the east elevation of the Macdonald Library's stack room. Labelled "A1," it is one of four extant drawings showing different window configurations for the east facing wall and was probably drawn by Frank Darling, the consulting architect. The plan is also labelled L.13 in the bottom right corner.
Item is a sheet with two drawings of the second floor of a building designed to serve as office and lecture spaces before being converted to a law library and eventually a university museum. One plan shows the space partitioned into a lecture hall, faculty room and offices to serve current needs; in the second it is laid out as a law library. There is also a small inset aerial perspective of the new (temporary) Arts Building in relation to the Science Building and Macdonald Library.
Item is a pencil drawing of the east elevation of the Macdonald Library's stack room signed in the bottom right corner by (Frank) Darling, who was the consulting architect. Labelled "A," it is one of four extant drawings showing different window configurations for the east facing wall.
Item is a pencil drawing of the north elevation of the Macdonald Library's stack room. Labelled "A2," it is one of four extant drawings of exterior elevations showing window configurations and is signed in the bottom right corner by (Frank) Darling, the consulting architect.
Item is a pencil drawing of the east elevation of the Macdonald Library's stack room. Labelled "B," it is one of four extant drawings showing different window configurations for the east facing wall and was probably drawn by Frank Darling, the consulting architect.
Item is a pencil drawing of the east elevation of the Macdonald Library's stack room. Labelled "B2," it is one of four extant drawings showing different window configurations for the east facing wall and is signed by (Frank) Darling, the consulting architect.
Item is an unsigned sketch, likely drawn by President Arthur MacKenzie, of first and second floor plans for the Macdonald Library, indicating stack rooms and undefined extensions to the rear of the building as well as the front.
Item is a site plan labelled "Scheme B" for the layout of roads and buildings on Studley Campus. Written on the reverse: "Darling's layout of grounds."
Box contains shop drawings and plans for the Life Sciences Centre and specifications for the Faculty of Arts and Social Sciences building. Plans in the box include spec IDs 83-87 and 90.
File contains five unsigned drawings for a proposed new library for Dalhousie College, dated almost a decade before the purchase of Studley. Drawings include a front elevation and ground floor plan in ink on waxed linen, and a less detailed front elevation, as well as floor plans for the basement, first and ground floors, in ink on paper.
Subseries comprises records created or collected by the Office of the Architect and Facilities Management at Dalhousie University related to the design and layout of the Studley and Carleton Campuses. Records include topographical maps and layouts.
Item is a site plan for Studley campus produced by Mackenzie & Howe, Landscape Architects and Artists. On the reverse is written: "Trial suggestion of ASM for laying-out of grounds and approved with slight changes (shown in red) by Darling and Mawson, and adopted." A.S.M. is Arthur Stanley MacKenzie, Dalhousie University president.
Item is a site plan labelled "Scheme E" for the layout of roads and buildings on Studley Campus. The drawing was produced by Darling & Pearson Architects of Toronto.
Item is a blueprint of a site plan drawn by T.H. Mawson & Sons (London, Lancaster and Toronto), showing a potential layout of future campus buildings and grounds. On the reverse President Arthur Stanley MacKenzie has written: "Mawson's modification of my plan / ASM."
Item is a site plan of Studley campus grounds, indicating the placement of roads and buildings. The drawing was produced by Mawson and Dunington-Grubb, Landscape Architects of Toronto. Written on the reverse: "Darling's layout of grounds."
Item is a site plan labelled "Scheme D" for the layout of roads and buildings on Studley Campus. The drawing was produced by Darling & Pearson Architects of Toronto.
File contains an electrostatic print set (Set A, No. 12) reproduced on polyester of Andrew R. Cobb's details of furnishings for the Science Building, dated July 28, 1914. There is also one page containing drawings of exterior details.
File comprises blueprints of Set A, No. 12, Andrew R. Cobb's architectural drawings for the Science Building, dated March 31, 1913. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included is a sheet of 3/4" scale details of furnishings.
File contains three original floor plans (first, ground and basement) for a science block for Dalhousie University, by A.R. Cobb, architect, and F. Darling, consulting architect. "Proposals from Darling for a Science Building" is written at the top of the first floor plan. File also contains three sets of blueprints, marked A, B and C, which offer different layouts for the ground and first floors.
Item is sheet no. 3 of 16 construction drawings for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University. It is a second floor plan with the (approval?) signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald
Item is a first floor plan of the Macdonald Library indicating lecture rooms and sizes and showing the upper part of the future stacks room. There are also two inset sketches of lecture room layouts, one to seat 45 and the other to seat 110; a list of subjects with corresponding professors' initials; and a note indicating the present use of second and third floors by Arts classes. The reverse side has red pencil or charcoal lines marking the walls and is marked "L46" in the lower right corner.
File comprises a complete set (Set A, No. 12) of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included in the folder is a schedule of equipment dated July 28, 1914.
Item is sheet no. 5 of 16 construction drawings of the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University. The drawing is of the east elevation and 3/4" scale details of roof vents and copper hopper heads, and has the (approval?) signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald.
Item is sheet no. 7 of 16 construction drawings of the MacDonald Memorial Library (now the MacDonald Building) at Dalhousie University. The drawing is of the north elevation and has the (approval?) signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald.
Item is sheet no. 11 of 16 construction drawings for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University. The drawings are of 1/4" scale hall and vestibule details and include elevations, a floor plan and a 3/4" scale detail of brick wainscoting. The sheet contains the (approval?) signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald.
Item is a ground floor plan of the Macdonald Library indicating men and women's reading rooms; cataloguing and accession rooms; librarians' offices; future reading rooms additions and the lower floor of the future stacks room. There are also inset sketches of reading room layouts with desks and capacity calculations.
File contains three versions of elevations of the Macdonald Library building shown adjacent to the Science Building, which was completed one year prior to the library.
File comprises a set of electrostatic prints on polyester of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details.
Item is sheet no. 6 of 16 construction drawings of the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, as well as 3/4" scale details of the Reading Room mantels and fireplaces. The drawing has the (approval?) signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald.
Item is sheet no. 10 of 16 construction drawings for the Macdonald Memorial Library (now the MacDonald Building) at Dalhousie University. The drawing is a longitudinal section looking south and has the (approval?) signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald.
Item is a second floor plan of the Macdonald Library as suggested (and perhaps drawn) by Arthur Stanley MacKenzie, who was president of Dalhousie from 1911-1931.
File contains two complete sets of construction blueprints for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. One set was reproduced from the set of 16 original sheets signed by G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald, all but three of which (nos. 8, 12 and 14) are located in UA-9, Box 1, Folder 1. The other blueprints are marked "set no. 4" and were reproduced before/without the approval signatures. There is also an incomplete set of diazo prints (purple ink on cream paper), as well as a complete set of heating and ventilating blueprints produced by MacMullen, Riley & Durley, Consulting Engineers, and signed by G.S. Campbell and A.D. Falconer and D. McDonald.
File contains construction drawings for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. The bulk of the drawings are part of an original set of 16 sheets dated Dec. 20, 1913 that contain the approval signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald. Sheets 8, 12 and 14 are missing, but are extant as blueprints in Box 1, Folder 2. File also contains a 1914 drawing showing revised window details and a sheet no. 6 from a 1920 alteration to the library. Drawing types include floor plans, elevations, sections and details.
Item is sheet no. 1 of 16 construction drawings for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University. It is a basement plan with a 1/2" = 1'0" scale detail of first floor beams and slab and has the (approval?) signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald.
