Showing 122 results

Archival Description
Halifax (N.S.) Architecture With digital objects
Print preview View:

Working drawings of furnishings for Killam Library

File contains 11 pages of blueline prints of hand-drawn working designs for Killam Library furnishings, labelled F-100 though F-110, which include initial and revised plans (elevations and section drawings) for: cataloguer and bibliographer's work units; card catalogue units; consultation tables; newspaper storage units; display cases; atlas stands; file tubs; and dictionary stands. Annotations with dates include revisions based on requests by librarians.

Working drawings of central display unit and book display case for the proposed Kipling Room in the Killam Library

File contains 2 pages of blackline prints of working designs for a display unit and book cases for the planned Kipling Room in the Killam Library. The drawings include elevations and section details, are stamped "preliminary," numbered S-8 and S-8, and dated 31 March 1969. The Kipling Room ended up remaining in the O.E. Smith wing of the Macdonald Library; it is possible that these furniture plans were used instead for the Morse Room, which was located behind the MacMechan Auditorium.

West elevation

Item is a presentation drawing created by Drew Sperry of the west elevation of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.

View west from Agricola Street

Item is a presentation drawing created by Drew Sperry showing the west view of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.

View from median strip

Item is a presentation board created by Drew Sperry showing the view from the median strip of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.

Urban context

Item is a presentation drawing created by Drew Sperry of the urban context of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College. His plan for the recreational complex is superimposed on to a map of Halifax.

Third floor plan

Item is a 1929 presentation drawing by architect Andrew Cobb of the third floor plan for an arts building at Dalhousie that was planned but never built. This version includes a drafting room and lecture hall both open to the roof, four smaller lecture rooms, five studies and a small library/office.

Third floor plan

Item is a 1932 presentation drawing by architect Andrew Cobb of the third floor plan for an arts building at Dalhousie that was planned but never built. This version includes an arts room open to the roof, five lecture rooms, five studies and a professors' office.

Third floor plan

Item is a presentation drawing created by Drew Sperry of the third floor plan of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.

Third floor plan

Item is a 1930 presentation drawing by architect Andrew Cobb of the third floor plan for an arts building at Dalhousie that was planned but never built. This version includes a large arts room and lecture hall both open to the roof, four small lecture rooms and five studies.

Suggested plan for Studley campus

Item is a pencil sketch of a plan for Dalhousie University's Studley campus. The drawing was produced by President Arthur Stanley MacKenzie; written on the back is: "One of early attempts by ASM to design the campus. When slightly modified it became final design."

Study for layout of grounds : Dalhousie University

Item is a site plan of Studley campus grounds, indicating the placement of roads and buildings. The drawing was produced by Mawson and Dunington-Grubb, Landscape Architects of Toronto. Written on the reverse: "Darling's layout of grounds."

South elevation

Item is a presentation drawing created by Drew Sperry of the south elevation of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.

South elevation

Item is a presentation drawing by Andrew Cobb of the south elevation of an arts building at Dalhousie that was planned but never built.

Site plan for Dalhousie University

Item is a site plan for Studley campus produced by Mackenzie & Howe, Landscape Architects and Artists. On the reverse is written: "Trial suggestion of ASM for laying-out of grounds and approved with slight changes (shown in red) by Darling and Mawson, and adopted." A.S.M. is Arthur Stanley MacKenzie, Dalhousie University president.

Site plan

Item is a presentation drawing created by Drew Sperry of the site plan for a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.

Section perspective looking north

Item is a presentation drawing created by Drew Sperry of a section perspective for a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.

Section perspective at handball courts

Item is a presentation board created by Drew Sperry showing a section perspective of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.

Second floor plan

Item is a 1932 presentation drawing by architect Andrew Cobb of the second floor plan for an arts building at Dalhousie that was planned but never built. This version includes seven lecture rooms, a dean's office and five studies.

Second floor plan

Item is a 1932 presentation drawing by architect Andrew Cobb of the second floor plan for an arts building at Dalhousie that was planned but never built. This version includes a general office, business office, offices for the registrar, president and secretary, a vault, three lecture rooms, and five studies.

Second floor plan

Item is a presentation drawing created by Drew Sperry of the second floor plan of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.

Preliminary floor plans for a library at Dalhousie University

File contains 3 pages of blueline prints of floor plans for a library at Dalhousie University, drawn by C.D. Davison & Company, the architectural firm that designed Dalhousie's Student Union Building in 1967. Undated and stamped "preliminary," the plans indicate a library with three floors. The drawings for floors 2 and 3 are annotated with potential seating and/or stack capacity for social sciences, humanities, rare books, graduate students, research and audio visual users, as well as conceptual drawings of study carrels and audio visual booths.

Plan showing location of trees, shrubs, etc. planted 1919-1920

Item is a site plan showing the location of trees, shrubs, and other plants planted on Dalhousie University's Studley Campus in 1919 and 1920. The drawing shows the location of the plants in relation to the Science Building (now the Chemistry Building), the Macdonald Memorial Library (now the Macdonald Building), and various pathways. All of the plants are labeled.

Plan of King's University plot, Studley Campus

Item is a site plan for the University of King's College, indicating sewer and gas lines, an oval driveway and a diagonal avenue originating from the corner of Oxford Street and Coburg Road. The plan is signed by H.R. Theakston, Dalhousie's university engineer.

Photograph of the Nova Scotia Association of Architects

Item is a photograph of James Sykes; G. E. (Ted) Brown; Hugh Davison; and Andy Lynch. The photograph appeared in a newspaper. A newspaper caption on the back of the photograph reads: "Dalhousie to the forefront again: G. E. (Ted) Brown, prominent over the years in Alumni Association activities and currently an association representative on the university's Board of Governors, was elected president of the Nova Scotia Association of Architects at its annual meeting last month. James G. Sykes, Director of Planning and Development at the university, was elected a councillor of the association."

Focus Photography

Results 1 to 50 of 122