File contains plans for the third floor addition to the Pharmacy Building, known now as the Burbidge Building. Drawings include floor plans, sections, roof plan, mechanical and plumbing plans.
File contains a set of construction and heating blueprints for the Arts Building for Dalhousie University (now the University Club), which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto and engineer Charles Harrington. The file also contains an electrostatic print set reproduced on polyester, which is missing sheet no. 4.
File contains three sets of drawings for the Central Services parkade produced by Chebucto Engineering Limited Consulting Engineers, Brandys McBride Richardson Engineering, and Rendan Fabricators.
File contains an incomplete set of ink on waxed-linen construction drawings for Dalhousie University's arts building, which was designed by Andrew Cobb and Frank Darling and built in 1921 on Studley Campus. Sheet no. 5 is missing, but is extant in a set of blueprints located in Box 1, Folder 7. Sheet no. 4 is a version in pencil on tissue. Most of the drawings were made by A.M.K., traced by P.K.A., and checked by A.R.C. (Andrew Cobb).
File contains the contract for the construction of the headhouse to greenhouse at the Nova Scotia Agricultural College between W.K. Murray (contractor) and Department of Public Works including modifications to specifications. The contract is dated November 5, 1913. Signed by "? Cobb" Architect; "E. H. Armstrong" Commissioner for Public Works and Mines; and "W.K. Murray" contractor.
File contains correspondence and a document regarding the construction of the headhouse to greenhouse at the Nova Scotia Agricultural College in November 1913.
File contains blueprint drawings of construction details, including window details; beam reinforcement; trusses; full-scale exterior masonry details; and the lettering for the cornerstone.
File contains four sets of drawings produced by Chebucto Engineering, Donald T. Matheson Engineering, Brandys McBride Richardson Engineering, and W. Roberts Engineering. Drawings include site plans, sections, electrical and floor plans.
Box contains shop drawings and plans for the Life Sciences Centre at Dalhousie University. Drawings are related to fire alarms; duct and cable trays; a diesel generator; metal components; general mechanical systems; general electric and lighting systems; and other components. Plans in the box include spec IDs 80-82.
Box contains shop drawings and plans for the Life Sciences Centre and specifications for the Faculty of Arts and Social Sciences building. Plans in the box include spec IDs 83-87 and 90.
Box contains shop drawings and plans for the Life Sciences Centre at Dalhousie University. Drawings include plans for sprinklers, metal components, mechanical components, structural concrete, and greenhouse additions. Plans include spec IDs 74-77.
Box contains shop drawings and rebar schedules and plans for the Life Sciences Centre at Dalhousie University, including the biology, oceanography, and psychology departments. The box also contains files with tenders, contracts, specs, and other information about the Arts and Administration Building and Gerard Hall. The specs in the box include spec IDs 89 and 72.
File contains a set of ten construction blueprints for a three-story house with six bedrooms and a maid's room, designed by Willam R. Cobb. The house was built in 1926 for William MacInnes (of W.R. MacInnes & Co, General Insurance Agents and Investment Bankers) at 18 Oxford Street, Halifax. In 1975 Dalhousie University purchased the house (then 135 Oxford Street) to convert to student housing. By 1984 the house had been replaced with a condominium complex called Oxford Court. The drawings are labelled sheets 1-10, and include plans, elevations, sections and roof details.
File contains drawings of an extension to the Royal Bank of Canada, Gottingen Street Branch, which became the Legal Aid building at Dalhousie University, created by J. Philip Dumaresq & Associates.
File contains drawings by Dumaresq & Byrne Limited and D. J. Morris Engineering for Fenwick Place, including: area lighting plot plan; TV antenna, intercom and telephone system risers; electrical distribution schemes; and owner distribution system risers and details.
File contains construction drawings for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. The bulk of the drawings are part of an original set of 16 sheets dated Dec. 20, 1913 that contain the approval signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald. Sheets 8, 12 and 14 are missing, but are extant as blueprints in Box 1, Folder 2. File also contains a 1914 drawing showing revised window details and a sheet no. 6 from a 1920 alteration to the library. Drawing types include floor plans, elevations, sections and details.
File contains an electrostatic print set reproduced on polyester of Sheet Nos. 1-16 of Andrew Cobb's construction drawings for the Macdonald Library, as well as a sheet of window details dated June 23, 1914 and one sheet of drawings of additions and alterations dated May 1, 1920.
File contains notes, correspondence, and plans for new construction at the Nova Scotia Agricultural College between 1947 and 1956. They pertain to the new science building (later named the Harlow Institute), dormitory (Trueman Hall), agricultural engineering building and various other buildings.
File contains the contract for the extension construction on Cumming Hall, the administration and classroom building on the Nova Scotia Agricultural College campus to be completed on or by November 24, 1912. The contract describes the work to be done, and the materials to be used in the additions and alterations to Agricultural College from the drawings and superintendence of Andrew R. Cobb, Architect, Halifax, N.S. “Set no. 5”.
File is reproductions of the architectural plans for the Nova Scotia Agricultural College Horticultural building, August 2nd, 1912. Set A8. Scale 1/8":1'-0". Andrew R. Cobb - Arch - Halifax. 2 sheets. Handwritten in white ink in the lower right corner on sheet no. 1 is illegible. The horticultural building was later named Collins Horticulture Building.
File contains the interior plans for the new Nova Scotia Agricultural College library, it was later named the MacRae Library in 1990 after former principal Herbert MacRae. The plans detail the libraries interior layout, furniture design, and layout for furnishings for the lower and main levels. Plans were designed by Berardinelli Design Limited, Halifax, NS. "Set no. 2".
File contains drawings for Peter Green Hall, labelled "Married Students Housing for Hfx Student Housing Society" on the earlier drawings. Drawings include floor plans, mechanical plans, details and specifications (1967, 1994 and 2000) and new metal siding details and elevations (1985).
File contains 25 photographs of the construction of the Dalplex between October 1976 to December 1976. The photographs were taken from 6 different viewpoints. There is a legend included that shows where each of the viewpoints was located.
Box contains prints, slides, negatives, and proof sheets of photographs of Dalplex construction; Dalplex roof; aerial photographs of Studley Campus; signage on Studley Campus; the Life Sciences Centre; the Forrest Building; houses on Henry Street; and other buildings. Box also contains an entry for the 1980 Canadian Consulting Engineering Awards by R.L. Booth of Carruthers & Wallace Limited and a presentation about stainless steel meniscus roofs. The photographs are stored in binders.
File consists of a plumber's estimate for installation of fixtures and plumbing at St. Patrick's Girls School and Dumaresq's notes regarding alterations, probably for the same project.
File comprises blueprints of Set A, No. 12, Andrew R. Cobb's architectural drawings for the Science Building, dated March 31, 1913. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included is a sheet of 3/4" scale details of furnishings.
File comprises a set of electrostatic prints on polyester of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details.
File contains a 1962 site plan and drawings for a dining hall, gymnasium, and women's residence. There are also 1985 drawings for renovations to the women's residence.
