Print preview Close

Showing 108 results

Archival Description
Halifax (N.S.) File Architecture
Print preview View:

6 results with digital objects Show results with digital objects

Working drawings of furnishings for Killam Library

File contains 11 pages of blueline prints of hand-drawn working designs for Killam Library furnishings, labelled F-100 though F-110, which include initial and revised plans (elevations and section drawings) for: cataloguer and bibliographer's work units; card catalogue units; consultation tables; newspaper storage units; display cases; atlas stands; file tubs; and dictionary stands. Annotations with dates include revisions based on requests by librarians.

Working drawings of central display unit and book display case for the proposed Kipling Room in the Killam Library

File contains 2 pages of blackline prints of working designs for a display unit and book cases for the planned Kipling Room in the Killam Library. The drawings include elevations and section details, are stamped "preliminary," numbered S-8 and S-8, and dated 31 March 1969. The Kipling Room ended up remaining in the O.E. Smith wing of the Macdonald Library; it is possible that these furniture plans were used instead for the Morse Room, which was located behind the MacMechan Auditorium.

'T' Building revision drawings

File contains architectural drawings for revisions to the "O" Building (Annex) at the Technical University of Nova Scotia, which were produced by the Campus Design Centre. Drawings include floor plans, sections, and details.

Studley campus site and landscape plans

File contains potential site plans for Dalhousie University's Studley campus as well as landscape plans indicating actual plantings. There is also one drawing of a unrealized medical school site plan.

Student Union Building addition construction drawings

File contains a construction package set of drawings for a 2002 addition to the original Student Union Building at Dalhousie University. The drawings were produced by Fowler Bauld and Mitchell, Campbell Comeau Engineering and Morris & Richard Consulting Engineers. The file includes a listing of set ID numbers and notes from Facilities Management.

Sketches and plans for renovations to the President's residence

File contains a set of four blueprint floor plans for the President's residence at Dalhousie University drawn by H.R. Theakston, University Engineer, in July 1925. The second floor plan indicates furniture placement and the reverse of the third floor plan is covered with handwritten notes and measurements. The file also contains six sheets of floor plans drawn up by Arthur Stanley MacKenzie, who was the first Dalhousie president to live in the house after its purchase by the university in 1925.

Science Building construction drawings

File comprises a complete set (Set A, No. 12) of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included in the folder is a schedule of equipment dated July 28, 1914.

Science Building construction drawings

File comprises a set of electrostatic prints on polyester of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details.

Science Building construction blueprints

File comprises blueprints of Set A, No. 12, Andrew R. Cobb's architectural drawings for the Science Building, dated March 31, 1913. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included is a sheet of 3/4" scale details of furnishings.

Science Block floor plans

File contains three original floor plans (first, ground and basement) for a science block for Dalhousie University, by A.R. Cobb, architect, and F. Darling, consulting architect. "Proposals from Darling for a Science Building" is written at the top of the first floor plan. File also contains three sets of blueprints, marked A, B and C, which offer different layouts for the ground and first floors.

Renovations to Studley Apartments

File contains floor and site plans and elevations for a 1975 renovation to Dalhousie's Studley Apartments at 1452 Le Marchant Street. File includes set ID arrangement details.

Renovations and extensions to 6152 Coburg Road

File contains copies of drawings for 6152 Coburg Road, including 1967-68 plans for renovations and extensions to the building when it served as the Nova Scotia College of Art, and 1980 renovation plans when the building was occupied by Dalhousie University School of Management. All three sets of drawings were produced by C.A. Fowler Bauld & Mitchell Ltd. File also contains a list of set ID arrangement details.

Public Health Centre for Dalhousie University

File contains a set of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-12, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations. There is also a front elevation titled "Dalhousie Medical Clinic -- Completed Scheme."

Public Health Centre for Dalhousie University

File contains an electrostatic print set reproduced on polyester of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-13, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations.

Presentation drawings for a proposed extension to the Science Building

File contains four copies of Andrew R. Cobb's drawings for an extension to the Science Building, which was commissioned by the Board of Governors as part of their building plans during the late 1920s/early 1930s, which also included an Arts Building, gymnasium, power plant, men's dormitory, and extension to Shirreff Hall. The drawings includes basement, ground and second floor plans, and north and west elevations. One copy is in pencil on tissue, two copies are blueprint and one is an electrostatic print set reproduced on polyester.

Presentation drawings for a proposed arts building at Dalhousie University

File contains presentation drawings created by Andrew Cobb for an arts building commissioned by the Board of Governors as part of their building plans during the late 1920s/early 1930s, which also included a gymnasium, power plant, men's dormitory, and extensions to the Science Building and Shirreff Hall. The planned site for the building, which was cancelled due to financial restraints, was adjacent to the temporary arts building, which had been built in 1921 to house the law school. The drawings are all marked "282," which presumably was Cobb's job number for the project.

Preliminary floor plans for a library at Dalhousie University

File contains 3 pages of blueline prints of floor plans for a library at Dalhousie University, drawn by C.D. Davison & Company, the architectural firm that designed Dalhousie's Student Union Building in 1967. Undated and stamped "preliminary," the plans indicate a library with three floors. The drawings for floors 2 and 3 are annotated with potential seating and/or stack capacity for social sciences, humanities, rare books, graduate students, research and audio visual users, as well as conceptual drawings of study carrels and audio visual booths.

Photographs of the Technical University of Nova Scotia

File contains photographs of buildings at Dalhousie University's Sexton Campus, previously known as the Nova Scotia Technical College and the Technical University of Nova Scotia (TUNS). The photographs show the Ralph M. Medjuck Building of Architecture and Planning or H Building; the G. H. Murray Building or G Building; the F. H. Sexton Memorial Gymnasium; students in a classroom; and other photographs from around the campus.

Photographs of the Killam Memorial Library construction

File contains photographs of the construction of the Killam Memorial Library at Dalhousie University in 1968 and 1969. The photographs show the construction site from different perspectives at different stages in the construction. Many of the photographs are stamped with "Fraser-Brace Maritimes Limited," the name of a construction company. The photographs were taken by Maurice Crosby Photography Ltd. and Wamboldt-Waterfield Photography Limited.

Photographs of Dalplex, the Life Sciences Centre, and other Dalhousie buildings

Box contains prints, slides, negatives, and proof sheets of photographs of Dalplex construction; Dalplex roof; aerial photographs of Studley Campus; signage on Studley Campus; the Life Sciences Centre; the Forrest Building; houses on Henry Street; and other buildings. Box also contains an entry for the 1980 Canadian Consulting Engineering Awards by R.L. Booth of Carruthers & Wallace Limited and a presentation about stainless steel meniscus roofs. The photographs are stored in binders.

Peter Green Hall revisions or issues drawings

File contains drawings for Peter Green Hall, labelled "Married Students Housing for Hfx Student Housing Society" on the earlier drawings. Drawings include floor plans, mechanical plans, details and specifications (1967, 1994 and 2000) and new metal siding details and elevations (1985).

'O' Building (Annex) revision drawings

File contains architectural drawings for revisions to the "O" Building (Annex) at the Technical University of Nova Scotia, which were produced by the Campus Design Centre. Drawings include floor plans, sections, plumbing, and details.

National Research Council building architectural plans

File contains architectural drawings for the National Research Council Laboratory and for the Institute for Marine Biosciences on Oxford Street in Halifax, Nova Scotia. The 1949 drawings, produced by Leslie Fairn and C. Gustave Brault, include plot plans; footings; floor plans; interior room and finish schedules; sections and details; and plumbing, heating and electrical plans. The 1964 and 1979 drawings are for additions and extensions, and were produced by Duffus, Romans, Kundzins and Rounsefell Ltd. The file also includes a set of drawings printed at reduced scale for a submission by Lydon Lynch issued September 2002 for a National Research Council New Industry Partnership Facility Institute for Marine Biosciences.

Medical Library floorplans

File contains basement and first floor plans stamped by the Library Bureau for a medical library at Dalhousie University. File also contains a technical drawing of a magazine storage rack for the medical-dental library, which were submitted by the Steel Equipment Company, Ottawa, ON.

Massey medals 1970

File consists of records relating to the exhibition 'Massey Medals for Architecture 1970', organized and circulated by the National Gallery of Canada. The exhibition was presented at Dalhousie Art Gallery from November 1-30, 1971.

Records consist of a condition report, exhibition agreement contract, descriptive exhibition text and packing lists, correspondence with the National Gallery, handwritten notes, and a press release from the Royal Architecture Institute of Canada (RAIC) regarding the finalists and winning entries for the Massey Medals Awards Competition.

Macdonald Memorial Library stack room floor plans and elevations

File contains a floor plan and exterior elevations for the MacDonald Library stacks, which show three different window styles for the east facing wall. There are also some early floor plans for the library indicating room appointments and elevations of bookshelves. Drawings are by both Andrew Cobb and Frank Darling.

Macdonald Memorial Library construction drawings

File contains construction drawings for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. The bulk of the drawings are part of an original set of 16 sheets dated Dec. 20, 1913 that contain the approval signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald. Sheets 8, 12 and 14 are missing, but are extant as blueprints in Box 1, Folder 2. File also contains a 1914 drawing showing revised window details and a sheet no. 6 from a 1920 alteration to the library. Drawing types include floor plans, elevations, sections and details.

Macdonald Memorial Library construction drawings

File contains an electrostatic print set reproduced on polyester of Sheet Nos. 1-16 of Andrew Cobb's construction drawings for the Macdonald Library, as well as a sheet of window details dated June 23, 1914 and one sheet of drawings of additions and alterations dated May 1, 1920.
Results 1 to 50 of 108