Item is a 1929 presentation drawing by architect Andrew Cobb of the third floor plan for an arts building at Dalhousie that was planned but never built. This version includes a drafting room and lecture hall both open to the roof, four smaller lecture rooms, five studies and a small library/office.
Item is a 1932 presentation drawing by architect Andrew Cobb of the third floor plan for an arts building at Dalhousie that was planned but never built. This version includes an arts room open to the roof, five lecture rooms, five studies and a professors' office.
Item is a 1929 presentation drawing by architect Andrew Cobb of the third floor plan for an arts building at Dalhousie that was planned but never built. This version includes drafting and lecture rooms open to the roof, offices and a library, four other lecture rooms, six studies and a storeroom.
Item is a 1930 presentation drawing by architect Andrew Cobb of the third floor plan for an arts building at Dalhousie that was planned but never built. This version includes a large arts room and lecture hall both open to the roof, four small lecture rooms and five studies.
Subseries comprises records created or collected by the Office of the Architect and Facilities Management at Dalhousie University related to the design and architectural revisions to the Technical University of Nova Scotia, later the Sexton Campus.
File contains a hot and cold water piping plan; excavation plan; sewer plan, including manhole details; a sketch of the dispensary quarters; and floor plans for the Public Health Building designed by Andrew R. Cobb.
File contains architectural drawings for revisions to the "O" Building (Annex) at the Technical University of Nova Scotia, which were produced by the Campus Design Centre. Drawings include floor plans, sections, and details.
Item is a pencil sketch of a plan for Dalhousie University's Studley campus. The drawing was produced by President Arthur Stanley MacKenzie; written on the back is: "One of early attempts by ASM to design the campus. When slightly modified it became final design."
Item is a site plan of Studley campus grounds, indicating the placement of roads and buildings. The drawing was produced by Mawson and Dunington-Grubb, Landscape Architects of Toronto. Written on the reverse: "Darling's layout of grounds."
File contains potential site plans for Dalhousie University's Studley campus as well as landscape plans indicating actual plantings. There is also one drawing of a unrealized medical school site plan.
File contains a construction package set of drawings for a 2002 addition to the original Student Union Building at Dalhousie University. The drawings were produced by Fowler Bauld and Mitchell, Campbell Comeau Engineering and Morris & Richard Consulting Engineers. The file includes a listing of set ID numbers and notes from Facilities Management.
File contains a set of four blueprint floor plans for the President's residence at Dalhousie University drawn by H.R. Theakston, University Engineer, in July 1925. The second floor plan indicates furniture placement and the reverse of the third floor plan is covered with handwritten notes and measurements. The file also contains six sheets of floor plans drawn up by Arthur Stanley MacKenzie, who was the first Dalhousie president to live in the house after its purchase by the university in 1925.
File contains proposed building site plans for Studley Campus drawn by H.R. Theakston, university engineer, as well as topographical maps of the Studley Estate prior to Dalhousie construction, including one created by engineering students. There are also several maps dating between 1922-1928 showing the campus's development.
Item is a site plan labelled "Scheme E" for the layout of roads and buildings on Studley Campus. The drawing was produced by Darling & Pearson Architects of Toronto.
Item is a site plan labelled "Scheme B" for the layout of roads and buildings on Studley Campus. Written on the reverse: "Darling's layout of grounds."
Item is a site plan labelled "Scheme D" for the layout of roads and buildings on Studley Campus. The drawing was produced by Darling & Pearson Architects of Toronto.
Item is a site plan for Studley campus produced by Mackenzie & Howe, Landscape Architects and Artists. On the reverse is written: "Trial suggestion of ASM for laying-out of grounds and approved with slight changes (shown in red) by Darling and Mawson, and adopted." A.S.M. is Arthur Stanley MacKenzie, Dalhousie University president.
Item is an unsigned drawing labelled "Dal Arts / 282" showing a cross section of staircases and including measurements for treads, and ceiling heights. It's part of a series of drawings made by Andrew Cobb for an arts building at Dalhousie that was planned but never built.
Item is a 1932 presentation drawing by architect Andrew Cobb of the second floor plan for an arts building at Dalhousie that was planned but never built. This version includes seven lecture rooms, a dean's office and five studies.
Item is a 1932 presentation drawing by architect Andrew Cobb of the second floor plan for an arts building at Dalhousie that was planned but never built. This version includes a general office, business office, offices for the registrar, president and secretary, a vault, three lecture rooms, and five studies.
Item is a 1929 presentation drawing by architect Andrew Cobb of the second floor plan for an arts building at Dalhousie that was planned but never built. This version includes five lecture rooms, seven studies and a faculty room.
File contains an electrostatic print set (Set A, No. 12) reproduced on polyester of Andrew R. Cobb's details of furnishings for the Science Building, dated July 28, 1914. There is also one page containing drawings of exterior details.
File comprises a complete set (Set A, No. 12) of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included in the folder is a schedule of equipment dated July 28, 1914.
File comprises a set of electrostatic prints on polyester of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details.
File comprises blueprints of Set A, No. 12, Andrew R. Cobb's architectural drawings for the Science Building, dated March 31, 1913. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included is a sheet of 3/4" scale details of furnishings.
Subseries comprises records created or collected by the Office of the Architect and Facilities Management at Dalhousie University related to the design, construction and renovations/additions to the Science Building, now the Chemistry Building, the first building constructed on Studley Campus, started in 1912 and completed in 1915.
File contains three original floor plans (first, ground and basement) for a science block for Dalhousie University, by A.R. Cobb, architect, and F. Darling, consulting architect. "Proposals from Darling for a Science Building" is written at the top of the first floor plan. File also contains three sets of blueprints, marked A, B and C, which offer different layouts for the ground and first floors.
File contains floor and site plans and elevations for a 1975 renovation to Dalhousie's Studley Apartments at 1452 Le Marchant Street. File includes set ID arrangement details.
File contains copies of drawings for 6152 Coburg Road, including 1967-68 plans for renovations and extensions to the building when it served as the Nova Scotia College of Art, and 1980 renovation plans when the building was occupied by Dalhousie University School of Management. All three sets of drawings were produced by C.A. Fowler Bauld & Mitchell Ltd. File also contains a list of set ID arrangement details.
Item is a set of plans (including index), which contains civil, landscaping, architectural, structural, electrical and mechanical drawings for a renovation and addition to Buildings A & B at the Technical University of Nova Scotia.
Subseries comprises records created or collected by the Office of the Architect and Facilities Management at Dalhousie University related to the design and construction of the Public Health Clinic, variously called the Public Health Centre and the Dalhousie Medical Clinic. The building was designed by Halifax architect Andrew Randall Cobb, built between 1922 and 1924. and renamed the Clinical Research Centre ca. 1967.
File contains a set of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-12, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations. There is also a front elevation titled "Dalhousie Medical Clinic -- Completed Scheme."
File contains an electrostatic print set reproduced on polyester of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-13, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations.
Item is a drawing of the proposed location of the former archives building (now the Chase Building) on Dalhousie University's Studley campus, showing ground elevations.
Item is a blueprint plan for a proposed heat trench on Forrest Campus (now Carleton Campus), Dalhousie University. The drawing is signed by HRT (Harold Theakston), University Engineer.
