Archives Catalogue

File contains three versions of elevations of the Macdonald Library building shown adjacent to the Science Building, which was completed one year prior to the library.

Macdonald Memorial Library construction and heating and ventilation blueprints

UA-9, Box 1, Folder 3
File
Dec 20, 1913

Part of Facilities Management

File contains two complete sets of construction blueprints for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. One set was reproduced from the set of 16 original sheets signed by G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald, all but three of which (nos. 8, 12 and 14) are located in UA-9, Box 1, Folder 1. The other blueprints are marked "set no. 4" and were reproduced before/without the approval signatures. There is also an incomplete set of diazo prints (purple ink on cream paper), as well as a complete set of heating and ventilating blueprints produced by MacMullen, Riley & Durley, Consulting Engineers, and signed by G.S. Campbell and A.D. Falconer and D. McDonald.

Bank books of the Nova Scotia Society of Engineers

MS-2-111, Box 4, Folder 6
File
1914 - 1918

Part of The Halifax branch of the Engineering Institute of Canada fonds

Receipt book of the Nova Scotia Society of Engineers

MS-2-111, Box 4, Folder 5
File
1915 - 1918

Part of The Halifax branch of the Engineering Institute of Canada fonds

Cash book and ledger of the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 3, Folder 9
File
1918 - 1937

Part of The Halifax branch of the Engineering Institute of Canada fonds

Accounting records of the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 5, Folder 1 - 4
File
1918 - 1939

Part of The Halifax branch of the Engineering Institute of Canada fonds

Photograph of a memorial in honour of engineers who died in WWI

PC1, Box 36, Folder 8
File
[after 1918]

Part of Dalhousie University Photograph Collection

Item is a photograph of a memorial in honour of engineers from the Nova Scotia Technical College who gave their lives in World War I. The memorial is a metal plaque engraved with the names of all of the causalities. The memorial was erected by the school's alumni association.

Correspondence regarding a study about building a bridge between Halifax and Dartmouth

MS-2-111, Box 3, Folder 2
File
1919 - 1920

Part of The Halifax branch of the Engineering Institute of Canada fonds

Correspondence between the Halifax branch of the Engineering Institute of Canada and L.H. Wheaton

MS-2-111, Box 6, Folder 2
File
1919 - 1923

Part of The Halifax branch of the Engineering Institute of Canada fonds

Additions and alterations to a library for Dalhousie University

UA-9, Box 1, Folder 9
File
May 1, 1920

Part of Facilities Management

File contains the heating plan for the Macdonald Library stack room and second floor, drawn by architect Andrew R. Cobb and Chris Harrington, heating engineer.

Nova Scotia Technical College mechanical engineering laboratory notebook

MS-2-823.2021-013, SF Box 113, Folder 1
File
1921

Part of Percy Jardine Bentley fonds

Correspondence of the fuel committee of the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 1, Folder 10
File
1923 - 1924

Part of The Halifax branch of the Engineering Institute of Canada fonds

Photographs of the manufacturing yard of reinforced concrete pipe

MS-2-111, Box 1, Folder 12
File
[1923?]

Part of The Halifax branch of the Engineering Institute of Canada fonds

File contains photographs of the manufacturing yard of reinforced concrete pipe in Saint John, New Brunswick.

Photograph of the Maritime professional meeting

MS-2-111, Box 1, Folder 13
File
1923

Part of The Halifax branch of the Engineering Institute of Canada fonds

File contains one photograph of a maritime professional meeting held in Saint John, New Brunswick, in September 1923.

Correspondence between the executive committee and members of the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 1, Folder 2
File
1923 - 1924

Part of The Halifax branch of the Engineering Institute of Canada fonds

Report of ballots of the nominating committee of the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 1, Folder 5
File
1923 - 1930; (predominant 1924)

Part of The Halifax branch of the Engineering Institute of Canada fonds

Correspondence regarding the nomination of members of the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 6, Folder 1
File
1923 - 1932

Part of The Halifax branch of the Engineering Institute of Canada fonds

Correspondence regarding arrears of members of the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 2, Folder 4
File
1924 - 1938

Part of The Halifax branch of the Engineering Institute of Canada fonds

Correspondence regarding the remuneration of professional engineers in Canada

MS-2-111, Box 6, Folder 3
File
1924 - 1929

Part of The Halifax branch of the Engineering Institute of Canada fonds

Correspondence regarding the recommendation of member of the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 6, Folder 4
File
1924 - 1941, (predominant 1937-1940)

Part of The Halifax branch of the Engineering Institute of Canada fonds

Gypsum products in floor, roof and wall construction

MS-2-111, Box 2, Folder 11
File
1926

Part of The Halifax branch of the Engineering Institute of Canada fonds

Ballots and report for the officers of the Halifax branch of the Engineering Institute of Canada for 1928

MS-2-111, Box 6, Folder 9
File
1927

Part of The Halifax branch of the Engineering Institute of Canada fonds

Application forms for transfer to a higher class of membership with the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 2, Folder 2
File
1931 - 1932

Part of The Halifax branch of the Engineering Institute of Canada fonds

Application forms for membership with the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 2, Folder 1
File
1931 - 1932; (predominant 1931 - 1932)

Part of The Halifax branch of the Engineering Institute of Canada fonds

Brief made by the Association of Professional Engineers of Nova Scotia and the Halifax and Sidney branches of the Engineering Institute of Canada

MS-2-111, Box 6, Folder 8
File
1934

Part of The Halifax branch of the Engineering Institute of Canada fonds

File contains the brief made by the Association of Professional Engineers of Nova Scotia and the Halifax and Sidney branches of the Engineering Institute of Canada to the government of Nova Scotia regarding the situation of the professional engineers in the province.

Financial statements of the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 4, Folder 4
File
1937 - 1941

Part of The Halifax branch of the Engineering Institute of Canada fonds

Correspondence of the membership and management committee of the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 1, Folder 1
File
1937 - 1939

Part of The Halifax branch of the Engineering Institute of Canada fonds

Records regarding the Maritime professional meeting hosted by the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 3, Folder 7
File
1939

Part of The Halifax branch of the Engineering Institute of Canada fonds

Nova Scotia Agricultural College engineering division annual reports

UA-43, Box 5, Folder 6
File
1939, 1947

Part of Nova Scotia Agricultural College fonds

File contains the Nova Scotia Agricultural College Engineering Division annual reports for 1939 and 1947.

Records of the committee on training and welfare of the young engineers of the Engineering Institute of Canada

MS-2-111, Box 1, Folder 9
File
1940 - 1941

Part of The Halifax branch of the Engineering Institute of Canada fonds

Blueprints for a proposed mezzanine floor

MS-4-135, OS Box 22, Folder 2
File
1952

Part of Oland and Son fonds

File contains two blueprints for a proposed mezzanine floor for Oland & Son. The drawings show the concrete plan for the mezzanine and details of certain sections. The drawings were produced by L. André Glen on March 6th, 1954, and were revised on March 22nd, 1952. See MS-4-135, Box 62, Folder 25 for related documents.

Engineering for intensive housing of livestock / John E. Turnbull

MS-14-REF, Box 3, Folder 5
File
1973

Part of Agricultural archives reference collection

Photograph of C Building (TUNS Electrical Engineering)

UA-10, Box 79, Folder 46
File
[ca. 1982]

Part of Technical University of Nova Scotia fonds

Photographs of B Building (TUNS Administration and CAD/CAM Centre)

UA-10, Box 79, Folder 45
File
1982 - 1990

Part of Technical University of Nova Scotia fonds

File contains photographs of the exterior of the B Building, which was completed in 1961.

Notes for talk given to engineers' wives

MS-2-650.2010-031, Box 56, Folder 48
File
September 23, 1995

Part of Budge Wilson fonds

File contains handwritten notes by Budge Wilson.

Compost engineering articles relevant to Canadian agriculture

UA-43-REF, Box 1, Folder 5
File

Part of Nova Scotia Agricultural College archival reference collection

Correspondence of the consolidation committee of the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 1, Folder 11
File
[191-] - 1938; (predominant 1937)

Part of The Halifax branch of the Engineering Institute of Canada fonds

Correspondence regarding membership with the Halifax branch of the Engineering Institute of Canada

MS-2-111, Box 2, Folder 5 and 6
File
[191-] - 1941; (predominant 1924)

Part of The Halifax branch of the Engineering Institute of Canada fonds

Records regarding the Maritime professional meetings of the Engineering Institute of Canada

MS-2-111, Box 3, Folder 3 and 4
File
[191-] - 1929

Part of The Halifax branch of the Engineering Institute of Canada fonds

Files consists of materials regarding the maritime professional meetings of the branches of the Engineering Institute of Canada across New Brunswick, Nova Scotia and Prince Edward Island.

Correspondence regarding the cooperation between the Engineering Institute of Canada and the Association of Professional Engineers of Nova Scotia