File contains the heating plan for the Macdonald Library stack room and second floor, drawn by architect Andrew R. Cobb and Chris Harrington, heating engineer.
File contains a blueprint set of six sheets of drawings of additions and alterations to the Macdonald Library, which was for the stack room constructed in 1920.
File contains a blueprint set of eight sheets of drawings of alterations and additions to the Macdonald Library and nine drawings from 1955, both by architect Leslie Fairn.
File comprises a set of architectural plans for the Killam Library, undated and labelled 4B REV. Drawings include a site plan, south elevation, and complete set of floor plans. The basement and main floor plans indicate the square footage of each working area (e.g., mechanical, circulation, administration).
File contains drawings by President Arthur Stanley MacKenzie, headed with a note that reads: "My first drafts of Library with narrow front allowing of Extension to footprint size." His drawings show the library as being a long, south-facing building with three floors and plans to extend wings on either side.
File contains 14 hand-drawn and coloured design sketches of rooms or areas in the Killam Library, including: main lobby, south; main lobby, north; entrance lobby; circulation desk; corridor; auditorium; exhibition area; special collections; study carrel; administration area; reserve reading area; lounge; staff dining room; and staff lounge. Fabric, wallpaper, carpet and other textile swatches are adhered to the presentation board.
File contains five unsigned drawings for a proposed new library for Dalhousie College, dated almost a decade before the purchase of Studley. Drawings include a front elevation and ground floor plan in ink on waxed linen, and a less detailed front elevation, as well as floor plans for the basement, first and ground floors, in ink on paper.
File contains three versions of elevations of the Macdonald Library building shown adjacent to the Science Building, which was completed one year prior to the library.
File contains full-scale and 3/4-scale shelving detail drawings; details for a chimney-top rain shield; and a leaded letters template for the O.E. Smith Wing addition built in 1956.
File contains two complete sets of construction blueprints for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. One set was reproduced from the set of 16 original sheets signed by G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald, all but three of which (nos. 8, 12 and 14) are located in UA-9, Box 1, Folder 1. The other blueprints are marked "set no. 4" and were reproduced before/without the approval signatures. There is also an incomplete set of diazo prints (purple ink on cream paper), as well as a complete set of heating and ventilating blueprints produced by MacMullen, Riley & Durley, Consulting Engineers, and signed by G.S. Campbell and A.D. Falconer and D. McDonald.
File contains construction drawings for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. The bulk of the drawings are part of an original set of 16 sheets dated Dec. 20, 1913 that contain the approval signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald. Sheets 8, 12 and 14 are missing, but are extant as blueprints in Box 1, Folder 2. File also contains a 1914 drawing showing revised window details and a sheet no. 6 from a 1920 alteration to the library. Drawing types include floor plans, elevations, sections and details.
File contains an electrostatic print set reproduced on polyester of Sheet Nos. 1-16 of Andrew Cobb's construction drawings for the Macdonald Library, as well as a sheet of window details dated June 23, 1914 and one sheet of drawings of additions and alterations dated May 1, 1920.
File contains a floor plan and exterior elevations for the MacDonald Library stacks, which show three different window styles for the east facing wall. There are also some early floor plans for the library indicating room appointments and elevations of bookshelves. Drawings are by both Andrew Cobb and Frank Darling.
File contains the interior plans for the new Nova Scotia Agricultural College library, it was later named the MacRae Library in 1990 after former principal Herbert MacRae. The plans detail the libraries interior layout, furniture design, and layout for furnishings for the lower and main levels. Plans were designed by Berardinelli Design Limited, Halifax, NS. "Set no. 2".
File contains 3 pages of blueline prints of floor plans for a library at Dalhousie University, drawn by C.D. Davison & Company, the architectural firm that designed Dalhousie's Student Union Building in 1967. Undated and stamped "preliminary," the plans indicate a library with three floors. The drawings for floors 2 and 3 are annotated with potential seating and/or stack capacity for social sciences, humanities, rare books, graduate students, research and audio visual users, as well as conceptual drawings of study carrels and audio visual booths.
File comprises a set of plans for the second, third, fourth and fifth floors of the Killam Library, mounted on presentation board with acetate overlays indicating space usages by reference to an unknown key-plan that includes numbers 1-11.
File contains 2 pages of blackline prints of working designs for a display unit and book cases for the planned Kipling Room in the Killam Library. The drawings include elevations and section details, are stamped "preliminary," numbered S-8 and S-8, and dated 31 March 1969. The Kipling Room ended up remaining in the O.E. Smith wing of the Macdonald Library; it is possible that these furniture plans were used instead for the Morse Room, which was located behind the MacMechan Auditorium.
File contains 11 pages of blueline prints of hand-drawn working designs for Killam Library furnishings, labelled F-100 though F-110, which include initial and revised plans (elevations and section drawings) for: cataloguer and bibliographer's work units; card catalogue units; consultation tables; newspaper storage units; display cases; atlas stands; file tubs; and dictionary stands. Annotations with dates include revisions based on requests by librarians.