Print preview Close

Showing 80 results

Archival Description
Facilities Management Halifax Regional Municipality (N.S.) File Architecture
Print preview View:
Descending

'T' Building revision drawings

File contains architectural drawings for revisions to the "O" Building (Annex) at the Technical University of Nova Scotia, which were produced by the Campus Design Centre. Drawings include floor plans, sections, and details.

Studley campus site and landscape plans

File contains potential site plans for Dalhousie University's Studley campus as well as landscape plans indicating actual plantings. There is also one drawing of a unrealized medical school site plan.

Student Union Building addition construction drawings

File contains a construction package set of drawings for a 2002 addition to the original Student Union Building at Dalhousie University. The drawings were produced by Fowler Bauld and Mitchell, Campbell Comeau Engineering and Morris & Richard Consulting Engineers. The file includes a listing of set ID numbers and notes from Facilities Management.

Sketches and plans for renovations to the President's residence

File contains a set of four blueprint floor plans for the President's residence at Dalhousie University drawn by H.R. Theakston, University Engineer, in July 1925. The second floor plan indicates furniture placement and the reverse of the third floor plan is covered with handwritten notes and measurements. The file also contains six sheets of floor plans drawn up by Arthur Stanley MacKenzie, who was the first Dalhousie president to live in the house after its purchase by the university in 1925.

Science Building construction drawings

File comprises a complete set (Set A, No. 12) of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included in the folder is a schedule of equipment dated July 28, 1914.

Science Building construction drawings

File comprises a set of electrostatic prints on polyester of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details.

Science Building construction blueprints

File comprises blueprints of Set A, No. 12, Andrew R. Cobb's architectural drawings for the Science Building, dated March 31, 1913. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included is a sheet of 3/4" scale details of furnishings.

Science Block floor plans

File contains three original floor plans (first, ground and basement) for a science block for Dalhousie University, by A.R. Cobb, architect, and F. Darling, consulting architect. "Proposals from Darling for a Science Building" is written at the top of the first floor plan. File also contains three sets of blueprints, marked A, B and C, which offer different layouts for the ground and first floors.

Renovations to Studley Apartments

File contains floor and site plans and elevations for a 1975 renovation to Dalhousie's Studley Apartments at 1452 Le Marchant Street. File includes set ID arrangement details.

Renovations and extensions to 6152 Coburg Road

File contains copies of drawings for 6152 Coburg Road, including 1967-68 plans for renovations and extensions to the building when it served as the Nova Scotia College of Art, and 1980 renovation plans when the building was occupied by Dalhousie University School of Management. All three sets of drawings were produced by C.A. Fowler Bauld & Mitchell Ltd. File also contains a list of set ID arrangement details.

Public Health Centre for Dalhousie University

File contains a set of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-12, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations. There is also a front elevation titled "Dalhousie Medical Clinic -- Completed Scheme."

Public Health Centre for Dalhousie University

File contains an electrostatic print set reproduced on polyester of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-13, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations.

Presentation drawings for a proposed extension to the Science Building

File contains four copies of Andrew R. Cobb's drawings for an extension to the Science Building, which was commissioned by the Board of Governors as part of their building plans during the late 1920s/early 1930s, which also included an Arts Building, gymnasium, power plant, men's dormitory, and extension to Shirreff Hall. The drawings includes basement, ground and second floor plans, and north and west elevations. One copy is in pencil on tissue, two copies are blueprint and one is an electrostatic print set reproduced on polyester.

Presentation drawings for a proposed arts building at Dalhousie University

File contains presentation drawings created by Andrew Cobb for an arts building commissioned by the Board of Governors as part of their building plans during the late 1920s/early 1930s, which also included a gymnasium, power plant, men's dormitory, and extensions to the Science Building and Shirreff Hall. The planned site for the building, which was cancelled due to financial restraints, was adjacent to the temporary arts building, which had been built in 1921 to house the law school. The drawings are all marked "282," which presumably was Cobb's job number for the project.

Photographs of Dalplex, the Life Sciences Centre, and other Dalhousie buildings

Box contains prints, slides, negatives, and proof sheets of photographs of Dalplex construction; Dalplex roof; aerial photographs of Studley Campus; signage on Studley Campus; the Life Sciences Centre; the Forrest Building; houses on Henry Street; and other buildings. Box also contains an entry for the 1980 Canadian Consulting Engineering Awards by R.L. Booth of Carruthers & Wallace Limited and a presentation about stainless steel meniscus roofs. The photographs are stored in binders.

Peter Green Hall revisions or issues drawings

File contains drawings for Peter Green Hall, labelled "Married Students Housing for Hfx Student Housing Society" on the earlier drawings. Drawings include floor plans, mechanical plans, details and specifications (1967, 1994 and 2000) and new metal siding details and elevations (1985).

'O' Building (Annex) revision drawings

File contains architectural drawings for revisions to the "O" Building (Annex) at the Technical University of Nova Scotia, which were produced by the Campus Design Centre. Drawings include floor plans, sections, plumbing, and details.

National Research Council building architectural plans

File contains architectural drawings for the National Research Council Laboratory and for the Institute for Marine Biosciences on Oxford Street in Halifax, Nova Scotia. The 1949 drawings, produced by Leslie Fairn and C. Gustave Brault, include plot plans; footings; floor plans; interior room and finish schedules; sections and details; and plumbing, heating and electrical plans. The 1964 and 1979 drawings are for additions and extensions, and were produced by Duffus, Romans, Kundzins and Rounsefell Ltd. The file also includes a set of drawings printed at reduced scale for a submission by Lydon Lynch issued September 2002 for a National Research Council New Industry Partnership Facility Institute for Marine Biosciences.

Medical Library floorplans

File contains basement and first floor plans stamped by the Library Bureau for a medical library at Dalhousie University. File also contains a technical drawing of a magazine storage rack for the medical-dental library, which were submitted by the Steel Equipment Company, Ottawa, ON.

Macdonald Memorial Library stack room floor plans and elevations

File contains a floor plan and exterior elevations for the MacDonald Library stacks, which show three different window styles for the east facing wall. There are also some early floor plans for the library indicating room appointments and elevations of bookshelves. Drawings are by both Andrew Cobb and Frank Darling.

Macdonald Memorial Library construction drawings

File contains construction drawings for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. The bulk of the drawings are part of an original set of 16 sheets dated Dec. 20, 1913 that contain the approval signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald. Sheets 8, 12 and 14 are missing, but are extant as blueprints in Box 1, Folder 2. File also contains a 1914 drawing showing revised window details and a sheet no. 6 from a 1920 alteration to the library. Drawing types include floor plans, elevations, sections and details.

Macdonald Memorial Library construction drawings

File contains an electrostatic print set reproduced on polyester of Sheet Nos. 1-16 of Andrew Cobb's construction drawings for the Macdonald Library, as well as a sheet of window details dated June 23, 1914 and one sheet of drawings of additions and alterations dated May 1, 1920.

Macdonald Memorial Library construction and heating and ventilation blueprints

File contains two complete sets of construction blueprints for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. One set was reproduced from the set of 16 original sheets signed by G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald, all but three of which (nos. 8, 12 and 14) are located in UA-9, Box 1, Folder 1. The other blueprints are marked "set no. 4" and were reproduced before/without the approval signatures. There is also an incomplete set of diazo prints (purple ink on cream paper), as well as a complete set of heating and ventilating blueprints produced by MacMullen, Riley & Durley, Consulting Engineers, and signed by G.S. Campbell and A.D. Falconer and D. McDonald.

MacDonald Library bookcase details

File contains full-scale and 3/4-scale shelving detail drawings; details for a chimney-top rain shield; and a leaded letters template for the O.E. Smith Wing addition built in 1956.

Gymnasium for Dalhousie University

File contains construction blueprints for the Studley Campus gymnasium, which was designed by architect Andrew Cobb and built by MacDonald Construction in 1932. Drawings include floor plans; elevations; footing plans; cross sections; and details for windows, cornices and other elements. The plans, which are labelled with job number U-311, are signed off by [W. Thompson?], Secretary of the Board of Governors.

Gerard Hall architectural plans

File contains a set of architectural plans for Gerard Hall (originally the Halifax Infirmary and School of Nursing) produced by architects C.A. Fowler @ Co. and printed at reduced scale.

Full-scale detail drawings of external masonry elements for Dalhousie's Medical Science Laboratory

File contains seven sheets of FSD (full-scale detail) drawings of masonry for details such as cornices, pilaster boxes and string courses, window sills, and mouldings for the Medical Science Laboratory at Dalhousie University. There are also vestibule details, including the fanlight over the main entrance door. Drawings include elevations, plans and sections.

First draft sketches for the Medical Science Building

File contains Andrew Cobb's rough sketches drawn on pages from a foolscap notebook for the Medical Science Building, including rudimentary elevations and floorplans; a note regarding the necessity of provision for women's lockers and lavatories and the possibility of a medical library; and an overhead drawing of a teaching theatre. File also includes five sheets of 1/16" scale drawings that include basement, first and second floor plans, and longitudinal and cross sections. The pages are all marked: "Please return to A.S.M. (Arthur Stanley Mackenzie)," and the first floor plan also has a note reading: "On S.S. 'Virginian' / July 1st/21."

Fenwick Place mechanical plans

File contains drawings by Dumaresq & Byrne Limited and D. J. Morris Engineering for Fenwick Place, including: area lighting plot plan; TV antenna, intercom and telephone system risers; electrical distribution schemes; and owner distribution system risers and details.
Results 1 to 50 of 80