Showing 14 results

Archival Description
Facilities Management Canada File Libraries
Print preview View:
Ascending

Dalhousie College — proposed new library

File contains five unsigned drawings for a proposed new library for Dalhousie College, dated almost a decade before the purchase of Studley. Drawings include a front elevation and ground floor plan in ink on waxed linen, and a less detailed front elevation, as well as floor plans for the basement, first and ground floors, in ink on paper.

Macdonald Memorial Library construction and heating and ventilation blueprints

File contains two complete sets of construction blueprints for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. One set was reproduced from the set of 16 original sheets signed by G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald, all but three of which (nos. 8, 12 and 14) are located in UA-9, Box 1, Folder 1. The other blueprints are marked "set no. 4" and were reproduced before/without the approval signatures. There is also an incomplete set of diazo prints (purple ink on cream paper), as well as a complete set of heating and ventilating blueprints produced by MacMullen, Riley & Durley, Consulting Engineers, and signed by G.S. Campbell and A.D. Falconer and D. McDonald.

Macdonald Memorial Library stack room floor plans and elevations

File contains a floor plan and exterior elevations for the MacDonald Library stacks, which show three different window styles for the east facing wall. There are also some early floor plans for the library indicating room appointments and elevations of bookshelves. Drawings are by both Andrew Cobb and Frank Darling.

Macdonald Memorial Library construction drawings

File contains construction drawings for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. The bulk of the drawings are part of an original set of 16 sheets dated Dec. 20, 1913 that contain the approval signatures of G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald. Sheets 8, 12 and 14 are missing, but are extant as blueprints in Box 1, Folder 2. File also contains a 1914 drawing showing revised window details and a sheet no. 6 from a 1920 alteration to the library. Drawing types include floor plans, elevations, sections and details.

Macdonald Memorial Library construction drawings

File contains an electrostatic print set reproduced on polyester of Sheet Nos. 1-16 of Andrew Cobb's construction drawings for the Macdonald Library, as well as a sheet of window details dated June 23, 1914 and one sheet of drawings of additions and alterations dated May 1, 1920.

MacDonald Library bookcase details

File contains full-scale and 3/4-scale shelving detail drawings; details for a chimney-top rain shield; and a leaded letters template for the O.E. Smith Wing addition built in 1956.

Arthur MacKenzie's plans for the Macdonald Memorial Library

File contains drawings by President Arthur Stanley MacKenzie, headed with a note that reads: "My first drafts of Library with narrow front allowing of Extension to footprint size." His drawings show the library as being a long, south-facing building with three floors and plans to extend wings on either side.