Showing 135 results

Archival Description
File Architecture English
Print preview View:

6 results with digital objects Show results with digital objects

Building plan

Architectural drawing for an unidentified commercial building. The dimensions of the windows are annotated, and the words: "cornice stone" are written at the lower edge of the roof

Photographs of the Killam Memorial Library construction

File contains photographs of the construction of the Killam Memorial Library at Dalhousie University in 1968 and 1969. The photographs show the construction site from different perspectives at different stages in the construction. Many of the photographs are stamped with "Fraser-Brace Maritimes Limited," the name of a construction company. The photographs were taken by Maurice Crosby Photography Ltd. and Wamboldt-Waterfield Photography Limited.

Photographs of the Technical University of Nova Scotia

File contains photographs of buildings at Dalhousie University's Sexton Campus, previously known as the Nova Scotia Technical College and the Technical University of Nova Scotia (TUNS). The photographs show the Ralph M. Medjuck Building of Architecture and Planning or H Building; the G. H. Murray Building or G Building; the F. H. Sexton Memorial Gymnasium; students in a classroom; and other photographs from around the campus.

Heating plans for the Sword and Anchor Inn and Sheet Anchor

File contains two drawings of heating plans for inns in Chester, Nova Scotia. One drawing is for the Sword and Anchor Inn and the other is for the Sheet Anchor Inn. The drawings were produced by Emco Supply from Halifax, Nova Scotia. See MS-4-136, Box 98, Folder 9 for related records.

Working drawings of central display unit and book display case for the proposed Kipling Room in the Killam Library

File contains 2 pages of blackline prints of working designs for a display unit and book cases for the planned Kipling Room in the Killam Library. The drawings include elevations and section details, are stamped "preliminary," numbered S-8 and S-8, and dated 31 March 1969. The Kipling Room ended up remaining in the O.E. Smith wing of the Macdonald Library; it is possible that these furniture plans were used instead for the Morse Room, which was located behind the MacMechan Auditorium.

Working drawings of furnishings for Killam Library

File contains 11 pages of blueline prints of hand-drawn working designs for Killam Library furnishings, labelled F-100 though F-110, which include initial and revised plans (elevations and section drawings) for: cataloguer and bibliographer's work units; card catalogue units; consultation tables; newspaper storage units; display cases; atlas stands; file tubs; and dictionary stands. Annotations with dates include revisions based on requests by librarians.

Preliminary floor plans for a library at Dalhousie University

File contains 3 pages of blueline prints of floor plans for a library at Dalhousie University, drawn by C.D. Davison & Company, the architectural firm that designed Dalhousie's Student Union Building in 1967. Undated and stamped "preliminary," the plans indicate a library with three floors. The drawings for floors 2 and 3 are annotated with potential seating and/or stack capacity for social sciences, humanities, rare books, graduate students, research and audio visual users, as well as conceptual drawings of study carrels and audio visual booths.

Architectural plans for the Killam Library

File comprises a set of architectural plans for the Killam Library, undated and labelled 4B REV. Drawings include a site plan, south elevation, and complete set of floor plans. The basement and main floor plans indicate the square footage of each working area (e.g., mechanical, circulation, administration).

Conceptual drawings of Killam Library interiors

File contains 14 hand-drawn and coloured design sketches of rooms or areas in the Killam Library, including: main lobby, south; main lobby, north; entrance lobby; circulation desk; corridor; auditorium; exhibition area; special collections; study carrel; administration area; reserve reading area; lounge; staff dining room; and staff lounge. Fabric, wallpaper, carpet and other textile swatches are adhered to the presentation board.

Macdonald Memorial Library stack room floor plans and elevations

File contains a floor plan and exterior elevations for the MacDonald Library stacks, which show three different window styles for the east facing wall. There are also some early floor plans for the library indicating room appointments and elevations of bookshelves. Drawings are by both Andrew Cobb and Frank Darling.

Macdonald Memorial Library construction and heating and ventilation blueprints

File contains two complete sets of construction blueprints for the Macdonald Memorial Library (now the Macdonald Building) at Dalhousie University, which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto. One set was reproduced from the set of 16 original sheets signed by G.S. Campbell, Chairman of the Board of Governors, and building contractors A.D. Falconer and D. McDonald, all but three of which (nos. 8, 12 and 14) are located in UA-9, Box 1, Folder 1. The other blueprints are marked "set no. 4" and were reproduced before/without the approval signatures. There is also an incomplete set of diazo prints (purple ink on cream paper), as well as a complete set of heating and ventilating blueprints produced by MacMullen, Riley & Durley, Consulting Engineers, and signed by G.S. Campbell and A.D. Falconer and D. McDonald.

Arthur MacKenzie's plans for the Macdonald Memorial Library

File contains drawings by President Arthur Stanley MacKenzie, headed with a note that reads: "My first drafts of Library with narrow front allowing of Extension to footprint size." His drawings show the library as being a long, south-facing building with three floors and plans to extend wings on either side.

Gymnasium for Dalhousie University

File contains construction blueprints for the Studley Campus gymnasium, which was designed by architect Andrew Cobb and built by MacDonald Construction in 1932. Drawings include floor plans; elevations; footing plans; cross sections; and details for windows, cornices and other elements. The plans, which are labelled with job number U-311, are signed off by [W. Thompson?], Secretary of the Board of Governors.

Sketches and plans for renovations to the President's residence

File contains a set of four blueprint floor plans for the President's residence at Dalhousie University drawn by H.R. Theakston, University Engineer, in July 1925. The second floor plan indicates furniture placement and the reverse of the third floor plan is covered with handwritten notes and measurements. The file also contains six sheets of floor plans drawn up by Arthur Stanley MacKenzie, who was the first Dalhousie president to live in the house after its purchase by the university in 1925.

Dalhousie Medical School architectural plans

File contains architectural drawings by Andrew Cobb for a proposed medical school building: two sets of basement, first and second floor plans; and single drawings of the front, end and rear elevations; cross and longitudinal sections; and a proposed layout for a physiology dark theatre.

Science Block floor plans

File contains three original floor plans (first, ground and basement) for a science block for Dalhousie University, by A.R. Cobb, architect, and F. Darling, consulting architect. "Proposals from Darling for a Science Building" is written at the top of the first floor plan. File also contains three sets of blueprints, marked A, B and C, which offer different layouts for the ground and first floors.

Science Building construction drawings

File comprises a complete set (Set A, No. 12) of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included in the folder is a schedule of equipment dated July 28, 1914.

Presentation drawings for a proposed extension to the Science Building

File contains four copies of Andrew R. Cobb's drawings for an extension to the Science Building, which was commissioned by the Board of Governors as part of their building plans during the late 1920s/early 1930s, which also included an Arts Building, gymnasium, power plant, men's dormitory, and extension to Shirreff Hall. The drawings includes basement, ground and second floor plans, and north and west elevations. One copy is in pencil on tissue, two copies are blueprint and one is an electrostatic print set reproduced on polyester.

Public Health Centre for Dalhousie University

File contains a set of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-12, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations. There is also a front elevation titled "Dalhousie Medical Clinic -- Completed Scheme."

Public Health Centre for Dalhousie University

File contains an electrostatic print set reproduced on polyester of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-13, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations.
Results 1 to 50 of 135