Showing 135 results

Archival Description
File Architecture
Print preview View:

6 results with digital objects Show results with digital objects

Working drawings of central display unit and book display case for the proposed Kipling Room in the Killam Library

File contains 2 pages of blackline prints of working designs for a display unit and book cases for the planned Kipling Room in the Killam Library. The drawings include elevations and section details, are stamped "preliminary," numbered S-8 and S-8, and dated 31 March 1969. The Kipling Room ended up remaining in the O.E. Smith wing of the Macdonald Library; it is possible that these furniture plans were used instead for the Morse Room, which was located behind the MacMechan Auditorium.

Building plan

Architectural drawing for an unidentified commercial building. The dimensions of the windows are annotated, and the words: "cornice stone" are written at the lower edge of the roof

Presentation drawings for a proposed extension to the Science Building

File contains four copies of Andrew R. Cobb's drawings for an extension to the Science Building, which was commissioned by the Board of Governors as part of their building plans during the late 1920s/early 1930s, which also included an Arts Building, gymnasium, power plant, men's dormitory, and extension to Shirreff Hall. The drawings includes basement, ground and second floor plans, and north and west elevations. One copy is in pencil on tissue, two copies are blueprint and one is an electrostatic print set reproduced on polyester.

Science Building construction blueprints

File comprises blueprints of Set A, No. 12, Andrew R. Cobb's architectural drawings for the Science Building, dated March 31, 1913. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included is a sheet of 3/4" scale details of furnishings.

Science Block floor plans

File contains three original floor plans (first, ground and basement) for a science block for Dalhousie University, by A.R. Cobb, architect, and F. Darling, consulting architect. "Proposals from Darling for a Science Building" is written at the top of the first floor plan. File also contains three sets of blueprints, marked A, B and C, which offer different layouts for the ground and first floors.

MacDonald Library bookcase details

File contains full-scale and 3/4-scale shelving detail drawings; details for a chimney-top rain shield; and a leaded letters template for the O.E. Smith Wing addition built in 1956.

Construction drawings for Dalhousie Arts Building

File contains an incomplete set of ink on waxed-linen construction drawings for Dalhousie University's arts building, which was designed by Andrew Cobb and Frank Darling and built in 1921 on Studley Campus. Sheet no. 5 is missing, but is extant in a set of blueprints located in Box 1, Folder 7. Sheet no. 4 is a version in pencil on tissue. Most of the drawings were made by A.M.K., traced by P.K.A., and checked by A.R.C. (Andrew Cobb).

Blueprint construction and heating plans for Dalhousie Arts Building

File contains a set of construction and heating blueprints for the Arts Building for Dalhousie University (now the University Club), which was designed by Halifax architect Andrew R. Cobb with consulting architect Frank Darling of Toronto and engineer Charles Harrington. The file also contains an electrostatic print set reproduced on polyester, which is missing sheet no. 4.

Studley campus site and landscape plans

File contains potential site plans for Dalhousie University's Studley campus as well as landscape plans indicating actual plantings. There is also one drawing of a unrealized medical school site plan.

Public Health Centre for Dalhousie University

File contains a set of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-12, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations. There is also a front elevation titled "Dalhousie Medical Clinic -- Completed Scheme."

Birchdale surveys and plans

File contains a 1916 Canadian Government Railways and Halifax Ocean Terminal Railway plan showing a proposed bridge for Coburg Road and access to Birchdale; an undated property survey showing existing buildings, including the Birchdale Hotel, Acadia Cottage, a bathing house, boat house and the north and south wharfs; two plans of proposed jetties on the Birchdale property; a floor plan by architect R.A. Johnson showing an addition to "Birchdale," which indicates a large playroom; and a floor plan for "Birchdale Annex" showing eight bedrooms. The annex addition probably dates to ca. 1920, when Birchdale Hotel was purchased by Dalhousie to house students. The file also contains a 1925 blueprint plan of a survey of the Allison Property on the west side of Oxford Street, which was purchased by Dalhousie University to use as the president's residence.

A bank for Halifax

File contains three of an original set of four presentation drawings on board created by Drew Sperry for Arch 5, an architecture class at the Nova Scotia Technical University. Drawings include a street perspective; sections; floor plan; and reflected ceiling plan.

A book shop

File contains three presentation drawings on board created by Drew Sperry for an architecture class at the Nova Scotia Technical University. Drawings include an interior perspective (in colour); sections and elevation; and floor plans.

Sperry residence kitchen renovation

File contains 3 construction drawings for a kitchen renovation, including a layout, section and door schedule. There are also five construction drawings for a bathroom renovation or addition.

Nener residence

File contains nine construction drawings for a house designed by Drew Sperry on Pauls Point Road in Hackett's Cove, Halifax Regional Municipality. Drawing types include a site plan; floor and foundation plans; electrical and plumbing plans; sections; and elevations.

Booth residence

File contains five presentation drawings, nine construction drawings, and three concept plans for a later addition to a house designed by Drew Sperry on Pauls Point Road in Hackett's Cove, Halifax Regional Municipality. Drawing types include site plans; floor plans; elevations and sections; foundation plans; electrical and plumbing plans.

Drawings and plans for the Life Sciences Centre

Box contains shop drawings and plans for the Life Sciences Centre at Dalhousie University. Drawings are related to fire alarms; duct and cable trays; a diesel generator; metal components; general mechanical systems; general electric and lighting systems; and other components. Plans in the box include spec IDs 80-82.

Photographs of Dalplex, the Life Sciences Centre, and other Dalhousie buildings

Box contains prints, slides, negatives, and proof sheets of photographs of Dalplex construction; Dalplex roof; aerial photographs of Studley Campus; signage on Studley Campus; the Life Sciences Centre; the Forrest Building; houses on Henry Street; and other buildings. Box also contains an entry for the 1980 Canadian Consulting Engineering Awards by R.L. Booth of Carruthers & Wallace Limited and a presentation about stainless steel meniscus roofs. The photographs are stored in binders.

Sketches and plans for renovations to the President's residence

File contains a set of four blueprint floor plans for the President's residence at Dalhousie University drawn by H.R. Theakston, University Engineer, in July 1925. The second floor plan indicates furniture placement and the reverse of the third floor plan is covered with handwritten notes and measurements. The file also contains six sheets of floor plans drawn up by Arthur Stanley MacKenzie, who was the first Dalhousie president to live in the house after its purchase by the university in 1925.

National Research Council building architectural plans

File contains architectural drawings for the National Research Council Laboratory and for the Institute for Marine Biosciences on Oxford Street in Halifax, Nova Scotia. The 1949 drawings, produced by Leslie Fairn and C. Gustave Brault, include plot plans; footings; floor plans; interior room and finish schedules; sections and details; and plumbing, heating and electrical plans. The 1964 and 1979 drawings are for additions and extensions, and were produced by Duffus, Romans, Kundzins and Rounsefell Ltd. The file also includes a set of drawings printed at reduced scale for a submission by Lydon Lynch issued September 2002 for a National Research Council New Industry Partnership Facility Institute for Marine Biosciences.

Addition to Pharmacy Building drawings

File contains plans for the third floor addition to the Pharmacy Building, known now as the Burbidge Building. Drawings include floor plans, sections, roof plan, mechanical and plumbing plans.

Dalhousie storage facility drawings

File contains four sets of drawings produced by Chebucto Engineering, Donald T. Matheson Engineering, Brandys McBride Richardson Engineering, and W. Roberts Engineering. Drawings include site plans, sections, electrical and floor plans.

Photographs of the Technical University of Nova Scotia

File contains photographs of buildings at Dalhousie University's Sexton Campus, previously known as the Nova Scotia Technical College and the Technical University of Nova Scotia (TUNS). The photographs show the Ralph M. Medjuck Building of Architecture and Planning or H Building; the G. H. Murray Building or G Building; the F. H. Sexton Memorial Gymnasium; students in a classroom; and other photographs from around the campus.

Working drawings of furnishings for Killam Library

File contains 11 pages of blueline prints of hand-drawn working designs for Killam Library furnishings, labelled F-100 though F-110, which include initial and revised plans (elevations and section drawings) for: cataloguer and bibliographer's work units; card catalogue units; consultation tables; newspaper storage units; display cases; atlas stands; file tubs; and dictionary stands. Annotations with dates include revisions based on requests by librarians.

Preliminary floor plans for a library at Dalhousie University

File contains 3 pages of blueline prints of floor plans for a library at Dalhousie University, drawn by C.D. Davison & Company, the architectural firm that designed Dalhousie's Student Union Building in 1967. Undated and stamped "preliminary," the plans indicate a library with three floors. The drawings for floors 2 and 3 are annotated with potential seating and/or stack capacity for social sciences, humanities, rare books, graduate students, research and audio visual users, as well as conceptual drawings of study carrels and audio visual booths.

Architectural plans for the Killam Library

File comprises a set of architectural plans for the Killam Library, undated and labelled 4B REV. Drawings include a site plan, south elevation, and complete set of floor plans. The basement and main floor plans indicate the square footage of each working area (e.g., mechanical, circulation, administration).

Historic buildings of Canada exhibition

File consists of a records related to the exhibition 'Historic Buildings in Canada' organized by the National Gallery of Canada and presented at Dalhousie in March 1966.

Records consist of an exhibition catalogue, correspondence between Evelyn Holmes and the National Gallery of Canada, contractual documents, and a press release from the National Gallery regarding the exhibition.

Results 1 to 50 of 135