Item is a blueprint plan for a proposed heat trench on Forrest Campus (now Carleton Campus), Dalhousie University. The drawing is signed by HRT (Harold Theakston), University Engineer.
Item is a plan showing a third floor layout of the Killam Library. The base plan includes the perimeter carrel seating and built-in seminar and office rooms; strips of paper illustrating the stack arrangement have been taped to this surface, and the plan is annotated by hand with the letters A, B, G and R.
File contains a set of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-12, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations. There is also a front elevation titled "Dalhousie Medical Clinic -- Completed Scheme."
File contains an electrostatic print set reproduced on polyester of construction drawings by Andrew R. Cobb for Dalhousie's Public Health Centre. Labelled Job No. K144, Sheet Nos. 1-13, the drawings include a footings and drainage plan; floor plans; roof plan; wiring plans; and elevations.
Subseries comprises records created or collected by the Office of the Architect and Facilities Management at Dalhousie University related to the design and construction of the Public Health Clinic, variously called the Public Health Centre and the Dalhousie Medical Clinic. The building was designed by Halifax architect Andrew Randall Cobb, built between 1922 and 1924. and renamed the Clinical Research Centre ca. 1967.
File contains copies of drawings for 6152 Coburg Road, including 1967-68 plans for renovations and extensions to the building when it served as the Nova Scotia College of Art, and 1980 renovation plans when the building was occupied by Dalhousie University School of Management. All three sets of drawings were produced by C.A. Fowler Bauld & Mitchell Ltd. File also contains a list of set ID arrangement details.
File contains floor and site plans and elevations for a 1975 renovation to Dalhousie's Studley Apartments at 1452 Le Marchant Street. File includes set ID arrangement details.
File contains three original floor plans (first, ground and basement) for a science block for Dalhousie University, by A.R. Cobb, architect, and F. Darling, consulting architect. "Proposals from Darling for a Science Building" is written at the top of the first floor plan. File also contains three sets of blueprints, marked A, B and C, which offer different layouts for the ground and first floors.
Subseries comprises records created or collected by the Office of the Architect and Facilities Management at Dalhousie University related to the design, construction and renovations/additions to the Science Building, now the Chemistry Building, the first building constructed on Studley Campus, started in 1912 and completed in 1915.
File comprises blueprints of Set A, No. 12, Andrew R. Cobb's architectural drawings for the Science Building, dated March 31, 1913. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included is a sheet of 3/4" scale details of furnishings.
File comprises a complete set (Set A, No. 12) of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details. Also included in the folder is a schedule of equipment dated July 28, 1914.
File comprises a set of electrostatic prints on polyester of Andrew R. Cobb's architectural plans for the Science Building, dated March 31, 1913 and signed on June 2, 1913 by building contractors Falconer & McDonald and G.S. Campbell, Chairman of the Board of Governors, Dalhousie College. Drawings include floor plans, exterior and interior elevations and sections; and exterior and interior details.
File contains an electrostatic print set (Set A, No. 12) reproduced on polyester of Andrew R. Cobb's details of furnishings for the Science Building, dated July 28, 1914. There is also one page containing drawings of exterior details.
Item is a 1932 presentation drawing by architect Andrew Cobb of the second floor plan for an arts building at Dalhousie that was planned but never built. This version includes seven lecture rooms, a dean's office and five studies.
Item is a 1932 presentation drawing by architect Andrew Cobb of the second floor plan for an arts building at Dalhousie that was planned but never built. This version includes a general office, business office, offices for the registrar, president and secretary, a vault, three lecture rooms, and five studies.
Item is a 1929 presentation drawing by architect Andrew Cobb of the second floor plan for an arts building at Dalhousie that was planned but never built. This version includes five lecture rooms, seven studies and a faculty room.
Item is a presentation drawing created by Drew Sperry of the second floor plan of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
Item is a presentation board created by Drew Sperry showing a section perspective of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
Item is a presentation drawing created by Drew Sperry of a section perspective for a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
Item is a presentation drawing created by Drew Sperry of the site plan for a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
Item is a site plan for Studley campus produced by Mackenzie & Howe, Landscape Architects and Artists. On the reverse is written: "Trial suggestion of ASM for laying-out of grounds and approved with slight changes (shown in red) by Darling and Mawson, and adopted." A.S.M. is Arthur Stanley MacKenzie, Dalhousie University president.
Item is a site plan labelled "Scheme D" for the layout of roads and buildings on Studley Campus. The drawing was produced by Darling & Pearson Architects of Toronto.
Item is a site plan labelled "Scheme B" for the layout of roads and buildings on Studley Campus. Written on the reverse: "Darling's layout of grounds."
Item is a site plan labelled "Scheme E" for the layout of roads and buildings on Studley Campus. The drawing was produced by Darling & Pearson Architects of Toronto.
File contains a set of four blueprint floor plans for the President's residence at Dalhousie University drawn by H.R. Theakston, University Engineer, in July 1925. The second floor plan indicates furniture placement and the reverse of the third floor plan is covered with handwritten notes and measurements. The file also contains six sheets of floor plans drawn up by Arthur Stanley MacKenzie, who was the first Dalhousie president to live in the house after its purchase by the university in 1925.
Item is a presentation drawing created by Drew Sperry of the south elevation of a proposed YMCA for Halifax, which was Sperry's terminal design project for his Bachelor of Architecture degree at the Nova Scotia Technical College.
File contains 13 presentation drawings on hardboard for the family home designed by Drew Sperry on Cranston Avenue, Dartmouth, Nova Scotia. The numbered drawings include a site plan; lower, main and upper floor plans; roof plan; sections; and font and back elevations.
File contains 11 construction drawings for the family home designed by Drew Sperry on Cranston Avenue. Drawings include elevations; window and door details; roof plans and details; and electrical and plumbing plans.
File contains 3 construction drawings for a kitchen renovation, including a layout, section and door schedule. There are also five construction drawings for a bathroom renovation or addition.
File contains a construction package set of drawings for a 2002 addition to the original Student Union Building at Dalhousie University. The drawings were produced by Fowler Bauld and Mitchell, Campbell Comeau Engineering and Morris & Richard Consulting Engineers. The file includes a listing of set ID numbers and notes from Facilities Management.
File contains potential site plans for Dalhousie University's Studley campus as well as landscape plans indicating actual plantings. There is also one drawing of a unrealized medical school site plan.
Item is a site plan of Studley campus grounds, indicating the placement of roads and buildings. The drawing was produced by Mawson and Dunington-Grubb, Landscape Architects of Toronto. Written on the reverse: "Darling's layout of grounds."
Item is a pencil sketch of a plan for Dalhousie University's Studley campus. The drawing was produced by President Arthur Stanley MacKenzie; written on the back is: "One of early attempts by ASM to design the campus. When slightly modified it became final design."
File contains 8 construction drawings for a swimming pool and enclosure added to the family home designed by Drew Sperry on Cranston Avenue. Drawings include a site plan; floor plans; sections; elevations; concrete details; and foundation plans. File also includes a site plan copy and location certificate.
File contains a hot and cold water piping plan; excavation plan; sewer plan, including manhole details; a sketch of the dispensary quarters; and floor plans for the Public Health Building designed by Andrew R. Cobb.
Subseries comprises records created or collected by the Office of the Architect and Facilities Management at Dalhousie University related to the design and architectural revisions to the Technical University of Nova Scotia, later the Sexton Campus.
Series contains materials documenting the rides used by the Bill Lynch Shows and related materials. Written material includes expenses, maintenance issues, and assembly instructions. Related materials include blueprints for the rides.